Posts by granitewolf11

I picked up some Kingston DDR3 1600 MHz RAM for my laptop from Amazon—8 GB total, and if it matters, I believe it runs at 1.35V. My old memory is a Samsung 4 GB stick, 10600, DDR3, which I think is rated at 1.5V.

Looking closely at the specs, it seems my laptop doesn't actually support more than 4GB per slot, so I suspect any tinkering with voltage combinations or different pairings might just be a waste of time—is that right? I did try popping this new RAM in alongside my existing stick, and while the BIOS recognizes 12 GB—and Windows shows 12 GB as well—the machine has gone absolutely haywire. The laptop is lagging terribly, the fans are spinning like crazy, and occasionally the CPU just spikes to maximum capacity. Essentially, it’s totally unstable and practically unusable; even when the CPU is idling and RAM usage is sitting at a mere 20%, those fans are screaming and the whole thing starts overheating.

Is there any actual workaround here, or is this 8 GB stick just a lost cause for this hardware? If anyone can use it, I'm happy to part with it for $83 just to avoid the headache of dealing with a return, and I'll just pick up another 4GB module instead.

Thanks for the suggestions, everyone—I really appreciate the input—but I’ve got a nagging feeling that one of those basic plug-in range extenders just won't have the antenna strength required to actually grab the signal and relay it effectively. I was leaning more toward finding a dedicated router specifically engineered for this kind of heavy lifting.

Anyway, while I technically have access to the network across the way—giving me total freedom to do whatever I want—I'm really not interested in the hassle of running long cables from their router out to my window just to catch a decent signal.

My plan is to test the connection on my laptop first—just to make sure I'm not making a foolish purchase—and if the signal holds up, I'll invest in a proper, high-performance router with beefy antennas that can actually handle the job. I don't need this setup for television, though; I'll just stick with a satellite service like DirecTV for that.

I’m trying to figure out what kind of hardware setup I would need to bridge the gap to a Wi-Fi router located about 50 meters away—basically, I want to grab that signal and then distribute it throughout my place so my phone and laptop stay connected, while also getting a hardwired connection via Ethernet for my TV and media streamer. My goal is to make it feel like I have high-speed internet "built into the walls," though I don't actually want to pay for a dedicated service since I have access to a 50 Mbps connection right across the street that works perfectly fine for everything I do.

Is there a specific type of router out there equipped with a high-gain antenna that can latch onto an existing Wi-Fi signal and then redistribute that connection through both wireless coverage and physical ports? Budget isn't really a major constraint here—I'm looking at something in the $500-$333 range.

Thanks!