Posts by Robin Hernandez8

shadowbear9 said:To me, that cocktail sounds almost perfect, though I suppose I don't really know what specific issues you're dealing with or how much it actually suits your needs... personally, I've been off my meds for ten days now and I haven't really noticed a massive difference. Today, I'm planning to take Seroquel along with Sanval, because if I don't, I end up staying awake far too long and then I just sleep the entire next day away... but seriously, how could they even prescribe you Sanval and Cerson together?

The thing is, my doctors have been swapping out my meds for years, trying all these strange little combinations, and I guess I've just become resistant to most of them.
I'm actually heading to see my psychiatrist now—he’s very reasonable when it comes to adjusting dosages, but maybe not so much regarding the actual root of my problem. See, I just can't seem to fall asleep without some kind of combination, and even then, everything wears off so fast.
It feels like every psychiatrist just goes in circles, cycling through the same old pills, different mixes, different doses... but nothing really sticks.
So, I’ve started doing it myself. The doses, the mixtures... this specific combo (Sanval and Cerson) is mine.
I know, I know, it’s probably not what I should be doing, but I've become addicted to whatever can actually knock me out. I don't really care about the antidepressant part... I mean, none of them seem to work for me anyway. Remeron is an antidepressant, but it helps me drift off, too.
If I don't take something to put me to sleep, I start having these full-on panic attacks and breakdowns. Like, literally. I feel like I'm losing my mind.

Right now, I’m hanging on by a thread with a mix of 100 Q-Pin, 60 Remeron, 10 Sanval, and 5 Cerson.

I honestly feel like I’m running out of options... even this specific combination is probably going to stop working for me in about a week.
What I really need is just a few months of stability without having to go through a detox, but man, that feels totally impossible right now!
Just one single night without my meds? It's absolute hell.

So, I was thinking about heading down to the local shop today to pick up some ink—honestly, there isn't much difference in price anyway—but I ended up explaining my whole situation to the clerk. They actually suggested it might be better if I just brought the printer in so they could take a look at it before I commit to buying anything. I guess that's probably the smarter move...

Peter Morgan3 said:By the way, here is the link for your printer toner page: http://moj-toner.com/printeri/model/epson-stylus-dx4400
(I highly doubt the issue lies with the third-party cartridges)...

Thanks. But yeah... I mean, honestly? It just doesn't seem worth shelling out the cash for the original stuff. Not really.
And honestly, I should probably mention—while I was actually out there hunting for the original part, the folks at the store were practically tripping over themselves to push those generic replacements on me. They were really laying it on thick, I guess.
Honestly, I mean, it almost feels like a better deal to just grab a whole pack of those third-party replacements every single time rather than shelling out for one genuine original. It’s funny how that works, I guess... maybe it’s just me, but the math seems to favor the clones more often than not.
So, I guess if this whole thing doesn't get sorted out... maybe next time when the ink starts running low, I'll try to actually play detective and figure out which specific color is dying based on what I've been printing lately. If that doesn't work? Well, then I might just have to bite the bullet, swap everything out, and call it a day. That's probably my only real move left, honestly. $17 It’s not really that much money, I guess. Not by a long shot.

Thanks so much for all the effort and help you've put into this.
So, tomorrow I’m going to run the second computer first, which means I'll be working with the other color next.
I'll be sure to check back in here and let everyone know how it all turns out.

Nathan Ramos said:By any chance, do you happen to have another computer lying around the house?

Well, I have this old clunker sitting somewhere... I think it’s running Vist. I haven't even turned it on in years.
Maybe I could dig it out tomorrow and give it a shot (assuming it actually still works, I guess). It honestly hadn't even crossed my mind.

Nathan Ramos said:Now listen, darling... why don't you try picking up some fresh ink and see if that does the trick? Though, if you ask me, I have a feeling that might not be the only thing causing this headache.

Which specific cable are we talking about here?

It was actually a power issue. That's why it wouldn't even turn on in the first place.

Now I'm just sitting here wondering if I should take the plunge and buy all four original ones, or if I should just go with some off-brand copies. Because, gosh, if I shell out all that cash for the genuine stuff and things still don't work right... I think I'd be absolutely livid.😵

Nathan Ramos said:Well, you know... it’s hard to say if that printer could be any older than mine, especially since my menu actually shows an "Ink level" option under maintenance for things like nozzle checks.
Go ahead, Robin Hernandez8, just take them one by one and see what happens.
EDIT: Oops... actually, looking at it again, maybe it really could be even older than mine.

I'm not entirely sure how old it is, but it's probably been sitting around for a few years now.

Back in the day, whenever the print quality started acting up or whatever, I'd just head over to the Control Panel, go to Hardware, then Devices and Printers, and find my HP Envy.
You could just right-click on Printing Preferences, hit maintenance, and do whatever you needed to do. It was easy. No big deal at all.

But NOW? If I right-click on Printing Preferences, absolutely nothing happens... I can only choose between "open" or "create shortcut," which isn't exactly helpful, is it?

Nathan Ramos said:If you find that a specific color is missing, the machine will let you know by stating it’s either empty or running low. However, if you see a Communication ERROR pop up, that signals a completely different kind of headache. It’s a bit like troubleshooting a car engine; if you understand how the ink cartridges function, you can guide someone through repositioning the carriage to swap them out. I always suggest pulling the cartridges one by one and reinserting them to see if that clears things up.

When was the last time you actually sat down to run a print job? I'm just wondering if the ink might have dried up inside the lines or if the print head has become a total mess from sitting idle too long.

Well, I tried taking the cartridges out one at a time, but... nothing. No change at all. It still won't tell me which color is missing or even how much is left in any of them. It just keeps blinking at me, signaling that something is wrong.

And now... well, things are getting a little bit complicated, I guess.
I haven't printed anything in about three months because the printer wouldn't even turn on. So, I ended up updating my windows and I had to grab a new cable, too—turns out the old cable was the reason it wouldn't power up in the first place.

Back when I was using my old windows setup, everything worked fine. It would automatically pop up a notification whenever a color was getting low or empty. Like, right at the start, it would clearly show me which ink was low or gone.

Everything was working perfectly then.

But then that whole mess with the cable happened, and I didn't realize the cable was the culprit until I finally replaced it along with the new windows installation.

And now I'm stuck with this headache.

Honestly... I really have no clue what the root cause is anymore.

Nathan Ramos said:Well, if there isn't a physical disc available, she actually provided a direct download link for it right back in her opening post...

Moving forward... which version of Windows did you select from this menu here... http://prntscr.com/5g4odf versus the one you actually have installed?

And finally... I’m not seeing any color profiles from the last installation, but honestly, it doesn't bother me one bit because using the software suite is such a headache. Once I look at the hard copy and realize the colors aren't quite hitting the mark, I just manually adjust all the settings and call it a day.

The bottom line is this... don't sweat the color accuracy on the screen; you'll see what you're really working with once you check the actual printout...

I went with Windows 7 64-bit.

My real issue is that the printer refuses to print anything at all if even a single color is empty. It's been like that from the very beginning. I guess that's just how this printer was built.

I had his drivers all set up from the original CD, but then I went ahead and installed some new Windows updates in the meantime, so I had to redo the whole installation process.
I didn't just download them blindly, though—I used the specific link I mentioned in my first post.

So, I guess the only real way out of this mess is to track down that original CD?
Honestly, I have no idea if I'll even be able to find it.

Peter Morgan3 said:I am unsure if this will be of any assistance to you, but perhaps take a look here: http://www.fixyourownprinter.com/forums/printer/58580

I was just reading some similar stuff on... I was just looking back through some old threads, and I think I found something that might help with those persistent driver issues we were talking about earlier regarding the printer levels. It’s one of those things where you think you've fixed everything, but then—poof—another error pops up out of nowhere. Anyway, I was digging around, and I stumbled upon this discussion about the different error levels. It’s kind of interesting, actually... I mean, if you look at how these systems are structured, it isn't always straightforward. Sometimes a simple Communication ERROR is just a hiccup, but other times, it feels like the whole setup is fighting you. I guess it really depends on whether you're running Windows 7 or something a bit more recent, though even on newer versions, things can get messy. I remember dealing with my old HP Envy once, and it felt like I was going in circles just trying to get the Scan Assistant to recognize the device. It’s frustrating, right? You spend an hour troubleshooting, thinking you've mastered it, and then the computer starts Searching again like nothing happened. Maybe I'm overthinking it, but there seems to be a pattern to how these errors escalate. If anyone is still struggling with the SX125 or even the older HP Envy models, take a look at these levels. It might give you a better idea of whether you're looking at a quick fix or if you need to pull your hair out a little bit. Just my two cents!

I mean, I've honestly tried everything... like, absolutely everything at my disposal, including... I was just poking around this site—http://inkjetprinterhelp.us/epsonSSC.html—and I thought it might be worth a look for anyone else struggling with their setup. It’s one of those little corners of the internet that actually seems to have some decent info on getting things running smoothly. I guess it could be helpful if you're feeling stuck. Maybe? Anyway, just thought I'd share!

So, what most people have figured out—and I guess I’ve finally come to the same conclusion myself after all this—is that absolutely nothing is working. It’s just... well, it's hopeless. The issue really just lies with the HP Envy itself.

I mean, I guess it’s kind of strange... because everything was working perfectly fine just a little while ago, you know? But then, out of nowhere, it just completely stopped showing the ink levels. It's like, one minute it's there, and the next—poof—nothing. Just totally gone.

I was wondering... does this happen with all those older HP Envy printers when you try to run them on Windows 7? I mean, is it just my luck, or is this some sort of widespread thing? 😲

It’s still showing me the exact same thing...
First it says Searching, and then—bam—Communication ERROR.
http://i1322.photobucket.com/albums/...ps27cac6fe.jpg
http://i1322.photobucket.com/albums/...ps82b5c9be.jpg

The scanning part actually works! I can get it done through the Scan Assistant or just by selecting the printer in the control panel. But, I don't know, I still can't figure out which specific color is running low.

Yeah, I am... but instead of what I had here:
http://s1322.photobucket.com/user/el...tml?sort=3&o=1
I've actually got this now:
http://s1322.photobucket.com/user/el...tml?sort=3&o=0

Gosh, I feel so silly right now...

Are you talking about the Adobe Creative Suite?

So, I just got my hands on some new windows (it's only been about a week) and I've hooked up my HP Envy printer/scanner. I suppose I really should be installing the drivers now, right?
The thing is, I don't have the original CD that came with the printer...
Does anyone know how I can get this sorted?
I actually went ahead and downloaded this first one http://esupport.epson-europe.com/Pro...qnNYU003D&tc=6 and installed it, but whenever I try to check things—like, say, seeing which ink color I'm running low on—nothing shows up. It just keeps throwing a Communication ERROR.
I can still scan stuff, which is fine, I guess, but I can't print anything because I know a color is missing, I just have no clue which one it is.

Please, if anyone could help me out...

Thanks so much, you guys 🙂

Is there some kind of program out there—you know, maybe something like a timer on a TV or a scheduled setting on an assembly line—that lets me set my computer to just shut down after a certain amount of time?

So, I think I have a bit of a situation here. I was taking Diane last month—and actually, a few months before that too—and while I was halfway through my prescription, I started having this light spotting that lasted for a couple of days.
After that happened, my period didn't show up right on schedule; it was late by a few days, I guess. I mentioned it to Dr. Miller, and he basically told me it wasn't anything to worry about.
Well, now I’m on Beller and it’s happening all over again. I’m getting that same bleeding thing, or whatever it is. I'm just not sure what to do. What do you guys think could be going on?
It’s honestly so frustrating. It feels like I only actually have a regular period about 60% of the time. 🙂