CheckEmoji Community · the emoji forum
🏠 Home 🆕 What's new ❓ Unanswered 🔥 Popular 📡 RSS Members 👥 0 online log in · register
Home › IT › Hardware › PC shuts down under heavy load

PC shuts down under heavy load

Started by Terry Foster5 · · 👁 4 views · 9 replies

📡 Subscribe to replies

Participants Terry Foster5crimsonstag84Larry Ortiz5Kimberly Gomez34fadedorca66
Terry Foster5 Terry Foster5 NewcomerOP
6 messages
joined Jan 2017
#1 ·
So, I'm guessing the PSU is the culprit since it keeps cutting out under heavy load. The PC is about 7 or 8 years old and is still running on its original power supply. It just shuts down right in the middle of a heavy task and won't boot back up until I flip the switch on the back of the unit off and then back on. It’s a Modec Feel 400 w. If anyone can confirm it's definitely the PSU, let me know—and if it is, hit me with some solid recommendations for a replacement.
crimsonstag84 crimsonstag84 Regular
518 messages
joined Jun 2010
#2 ·
It’s almost certainly a power supply issue. I guess you might want to see if anyone can lend you a better unit just to test it out for a day?

Anyway, Fortron Hexa + 400 w
Terry Foster5 Terry Foster5 NewcomerOP
6 messages
joined Jan 2017
#3 ·
Will this power supply work on an older PC? Are all the connectors standardized? I don't have anyone I can borrow one from to test it out.
Larry Ortiz5 Larry Ortiz5 Regular
710 messages
joined May 2020
#4 ·
They’re all pretty much the same, really—unless you're working with an older motherboard that only uses a 20-pin connector while your power supply has the standard 24-pin. In that case, you can actually just pull those extra 4 pins off the main 24-pin connector from the PSU... kind of like what you see in the picture, just so you know what to look for if you run into it. 🙂

image
Terry Foster5 Terry Foster5 NewcomerOP
6 messages
joined Jan 2017
#5 ·
It’s a 24-pin motherboard, thanks for the help 🙂
Terry Foster5 Terry Foster5 NewcomerOP
6 messages
joined Jan 2017
#6 ·
It's the same deal with these CPU and GPU pins. It says 4+4 and 6+2, so does that mean they can be split up?
Kimberly Gomez34 Kimberly Gomez34 Regular
686 messages
joined Jul 2009
#7 ·
Exactly. You'll need the 4+4 pin for the CPU and the 6+2 pin for the GPU.

By the way, what kind of temperatures are you seeing on the CPU and GPU when under load? It could potentially be an overheating issue, though I suspect the power supply is the more likely culprit here.
Terry Foster5 Terry Foster5 NewcomerOP
6 messages
joined Jan 2017
#8 ·
Can't really verify much since the whole thing just dies under load immediately lol. Ran an OCCT power supply test last night and it shut down after two seconds flat. I already ordered a Fortron Hexa + 400 w, so hopefully I can figure out the installation. Just praying it has all the same connectors as my current one.
Terry Foster5 Terry Foster5 NewcomerOP
6 messages
joined Jan 2017
#9 ·
Changed the thermal paste about three months ago. I also blow out the dust once a month.
fadedorca66 fadedorca66 Regular
372 messages
joined Nov 2022
#10 ·
Nah, you didn't screw up by getting a new PSU. That thing was junk when you first bought it, and after 7 or 8 years, it’s basically twice as much junk now 😁

You were going to have to swap it out eventually anyway, so you haven't really lost anything—especially since it's not even about the power supply anymore

You must log in or register to reply here.

Log in Register

🔗 Similar threads