Posts by Kyle Sanchez4

It's like they were assembling his 🤣
at a local Best Buy.

What's the deal?? 🤣 🤣

Is that an overclock or just the factory setting?

It’s working now

Looks like you tried to paste some links and failed

Terry Wilson3 said:I don't follow you guys. I’m not going to install fans just because they'll be spinning when I'm already feeling cold. That's not happening.
Underfloor heating.
Mesh substrate, 2.2 mm diameter, for retrofitting.
Retrofitting both new builds and older structures. Power rating: 135 W/m2.
Heating surface area per square meter? 390. That’s it. $0.00
Heating surface of 21 square feet = 590. $0.00
Heating area of 3 square meters = 790. $0.00
OS 107859 - 13472831
Starting at $390.

Might as well throw a radiator in there too.

600 x 600 mm = 364 W = $63
600 x 600 mm = 1012 W = $96
600 x 800 mm = 1346 W = $130
600 x 1000 mm = 1683 W = $163
600 x 1600 mm = 2693 W = $263
600 x 1200 mm = 2020 W = $196
600 x 1400 mm = 2356 W = $230
OS 103210 - 13472109
Starting at $189.

At Bauhaus.
(Just kidding, obviously.)

What’s the joke here? I find it pathetic. 🙂

The first one is the factory setting, while what follows the @ symbol is the current frequency

I don't usually post here, but smashing a case just to slap four neon strips on it is like some guy in a beat-up Civic cranking the bass until the windows rattle... all just to make sure everyone hears those obnoxious subwoofers from three blocks away...

Spent a little more time messing around with this piece of junk motherboard. At an 11x multiplier, the > hits 266. Tried 10x and managed 270, but 300 is a total no-go. When I set the FSB to 333 at 9x, the BIOS just throttled it down to 278 on its own. Anyway, I'm sticking with 11x at 266.

Morgan Richardson said:Is it even possible that the guys I bought this rig from installed some kind of lockout to prevent overclocking? Tried reinstalling the drivers, still nothing. Just stuck. No OC... 😕

😕
CPU host is set to enabled... ☕

No... you have to have CPU host enabled enabled

Strange..

What was the temperature before the reset?

Strange, but the TAT is killing the CPU

What software did you use to stress the CPU and track the temps?

Overclocking?

HWMonitor is off by about 5 degrees... my BIOS is set to trigger an alarm at 60, but it didn't trip until HWMonitor hit 65...

I get it, but it's weird to me. Take someone with a P35-DS3, for instance—they either won't overclock at all, or they just leave it sitting at 2.4

Don't touch the Latency; you won't notice any difference... by the way, is it just me, or am I the only one running an Intel Core 2 Duo E4500 at 2.93GHz on this piece of junk motherboard?🤣

vividhound19 said:Does anyone have a link showing the overclocking limits for an Intel Core 2 Duo?

www.let-me-see-my-crystal-ball.org