bluecyclist64 said:The idea of dinosaurs on a distant planet? Honestly, wouldn't it be even better if they stumbled upon the Beatles who never broke up, with Bruce Lee acting as their bodyguard?
The plot's underlying logic is just... something else entirely...🙏 The core logic...🤣🤣🤣
I'm laughing so hard I'm actually worried my brain might short-circuit from trying to make sense of this synopsis...🤣🤣🤣
On a distant planet? Isn't this just Earth? Personally, I thought the movie was garbage; there isn't even any satisfaction to be found in the sci-fi elements...
Jack Cook7 said:Hardware acceleration is really all about the drivers properly translating software requests to the hardware on the video card, rather than being an issue with the browser itself.
I mean, how can someone just choose not to use 3D acceleration? You can always disable it and stick strictly to 2D. Honestly, there are very few applications outside of gaming that actually lean on 3D, unless you happen to be working in 3D modeling or something along those lines.
The real fix here is simply finding a stable, correct driver. It seems pretty obvious that if a fresh OS installation runs smoothly for a while, then the culprit isn't the original driver, but rather some subsequent patch applied to either the driver or the OS itself.
The reason things tend to crash when hardware acceleration is enabled is that video drivers operate in ring0 to maintain speed—much like how DOS used to work—which means the OS loses its ability to control them if an error occurs.
I was under the impression that most video applications have been using D3D surfaces for rendering video frames by default for quite a while now... I thought we were specifically discussing disabling hardware acceleration for video decompression...
The GT 1030 is definitely capable enough when it comes to 4K playback, and it can even handle 8K playback, but if you're looking to actually edit 4K video—you know, adding effects and all that—very few processors can manage that in real time. As Jerry Robinson56 puts it, doing things "smoothly" requires a dedicated GPU, but those cards really need more muscle and higher VRAM along with MPEG encoding, which is something the GT 1030 just lacks. You could certainly upgrade this setup by pairing a modern processor with an RTX 3060 and some extra memory, where 32 GB of RAM should be plenty.
Adam Moore3 said:It’s definitely doable; I’m running a 1600AF myself (which should be basically the same thing), and I get prompted to install 😬 It’s quite possible you just haven't enabled fTPM in your BIOS yet, especially if your motherboard doesn't have a dedicated hardware TPM chip.
Hmm... I suppose I should double-check that, but from what I’ve gathered during my research, that particular fix isn't really mentioned anywhere... it might offer you the option to install, but does it actually verify compatibility during the process? If I recall correctly, the installation itself doesn't seem to run a compatibility check on its own...
Microsoft basically tells you to go jump in a lake: https://learn.microsoft.com/en-us/wi...amd-processors
Am I living in some sort of parallel universe? It feels like we went from struggling to run Adobe Photoshop and Microsoft Excel on ancient hardware straight into the era of 4K video... But what would anyone actually do with 4K footage? Is it for heavy editing, adding crazy effects, or just scrolling through clips? And honestly, what is the point of 4K if you don't even have a 4K monitor to show it off? I’m a bit worried that the GeForce GT 1030 might struggle because of its limited VRAM, though I suppose it really depends on how the software handles the GPU and whether it supports hardware decoding. I’m running a 1600X on my current motherboard, and I can't even get Windows 11 to install because the processor is just too outdated; I guess I'll have to dig into which older Ryzen chips actually meet the requirements.
Jacob Alvarez said:Yeah, but it turns out it's actually overclocked. I'm not exactly seeing a massive jump in speed, and honestly, I'm just a little worried that I might be cutting its lifespan short.
It’s basically overclocked according to the RAM manufacturer's own standards. You aren't shortening its life, and certainly nothing significant. As they say, "stop worrying and love the bomb." 😬
I’m sorry, but I have to wonder—is the issue actually the ambient light in the room, or is it just the glare from reflections? If the screen itself is too dim to begin with, a screen protector probably won't do much to help.
32GB isn't really necessary here, especially since he already specified what games he's playing, and besides, there's always the option to add more later if he decides to upgrade his gaming setup
Ever since I picked up that EVGA 600W Hydro K Pro, I can honestly say it was one of my best decisions; my PC stopped crashing entirely, and even now, running an RX 6700 at a full overclock under heavy load, everything stays perfectly stable... just a little observation from my side. It really goes to show that you won't be making a mistake if you decide to shell out that extra $30 for a Seasonic unit instead.
Ronald Bishop58 said:Me, rude?!? And what about that sarcastic little emoticon you tossed at the end of your last post? It certainly didn't feel like you were actually looking for an explanation! I'm done with this conversation.
You’re being pretty rude here, so maybe try acting that way toward someone you actually know, especially if you're being unprovoked. "2K" can refer to a hundred different things, so don't we really need to ask for clarification on what you meant? Nobody actually calls monitors that resolution "2K" in a standard way. In my line of work, 1920 and 2K are treated as the exact same thing, yet you're acting like they're interchangeable, so isn't it perfectly reasonable to ask for a bit more detail?
velvetlynx3 said:Yeah, I recall thinking a solid 3.0 was much better than dealing with an unstable 4.0, but does anyone know why they decided to scrap the option to force lanes 1, 2, or 3?
velvetlynx3 said:It’s pretty strange how they flipped their decision, especially since there isn't even an option in the BIOS to toggle it for lanes 1, 2, or 3... I haven't been following this closely, but does anyone actually know why they were messing around with the PCIe settings like that?
I’m guessing that once they hit BIOS version 5220, they stopped mentioning "removes Gen 4 support when using Ryzen 3000 CPUs" because it’s just assumed now... talk about being lucky, right?
Though, looking back, I suppose I was actually quite fortunate that I didn't pick something like a 6650XT, otherwise I would have been stuck dealing with a GPU running at PCIe 3.0 x8 speeds.🤦
I ran a Blackmagic RAW speed test and the results confirmed it: 42 fps on x8 versus 66 fps on x16, so there is definitely a measurable impact there...
The card turned out to be wider than I had anticipated, which led to a bit of a headache while I was rearranging my PC components because the hard drive was getting in the way. What a hassle. Performance-wise, things are mostly where I expected them to be, though a few specific tasks are only about 1.5x faster when I was really hoping for a 2x or 2.5x jump, so that’s a slight letdown. It isn't all just pure math, of course, but I don't really feel like everything has become drastically faster; perhaps you'd only truly say the software is flying once you step up to an RTX 3080. My old GTX 1060 is still acting like a total zombie, refusing to fade into history since its performance stays surprisingly consistent in certain areas. What’s really bothering me, though, is that GPU-Z shows the card running on PCIe 3.0 instead of 4.0, even though CPU-Z, Device Manager, and several other tools report that the slot is operating in 4.0 mode. I'm using an MSI MAG X370, and I heard some BIOS versions used to support 4.0 before they supposedly removed it, but if that's the case, why do so many programs still insist the PCIe slots are at 4.0? Is there anything I can actually do here, considering I can't find any option in the BIOS to manually toggle the PCIe generation?
velvetlynx3 said:No need to worry, I’ve already given it a shot, and the only thing that happens is the RGB logo lights up; the card doesn't even show up in the Device Manager, nor does it throw any of those warning messages like some of my previous cards used to...
👍 So, my RTX 3060 finally arrived, and now I'm just sitting here waiting for it to acclimate to the room temperature before I dive in. 🙂
With those 8-pin connectors, those two extra pins are really just "sense" pins rather than actual power conductors; they basically just tell the card that the cable can handle a higher current load. You might actually get away with using a 6-pin connector since some graphics cards don't even bother checking for those two specific pins, but given that you're working with an older power supply that likely has multiple rails, I wouldn't really risk it if I were you.
Yeah, I’d happily go pick it up myself if I actually knew where the 10950 Houston (express) distribution center was located—is it somewhere near San Jose? Honestly, they did the exact same thing when I placed an order for a friend; it seems to be their standard operating procedure, perhaps because they don't have any other way to log internal shipping delays into their database.
@Mad Ant: What's the deal with a 620W power supply that only comes with a single PCI-E cable? Is it a modular unit where you just misplaced the other cord, or what?
I’m currently being held hostage by a FedEx package; my GPU has been sitting in Washington, D.C. since yesterday, but now they’re claiming I requested to push back the delivery date🤦 Hopefully, it actually shows up tomorrow...
They haven't even dispatched the card yet, and the weekend is already creeping up on us...☕
On a side note, my Kindle finally arrived, though I think I'll wait until tomorrow to go pick it up since today is Friday the 13th and I'm a bit superstitious about those things...
As for you, it sounds like you're heading into a weekend of being told, "Honey, could you just put that sandwich on the table?" 😁