Anyone still running Windows 7?

Look, if you just installed a fresh copy of Windows 7, you're basically seven years behind on updates. It’s only logical that it’s going to take a massive amount of downloading just to get everything up to speed...

I used to have Windows 7 installed, but—well, turns out this guy completely wiped everything out and did a fresh install from scratch.

And why on earth would he even want to go breaking his Windows installation in the first place?

Honestly, my laptop was being such a massive pain—just incredibly sluggish and clunky—that I went on a mission to make sure everything was running absolutely tip-top. And guess what? It actually is! I ended up digging through Google to figure out how to kill those automatic updates on Windows 7 (it’s wild that I couldn't find much info on this online, but hey, I'm clearly not the only one struggling with this). So, I finally shut them off—if anyone else is dealing with a similar headache on Windows 7, here is the fix: go to Control Panel, hit Windows Update, then Change Settings, select "Never check for updates" instead of installing them automatically, and just click OK.

Nicole Newman15 said:My laptop was such a total disaster—glitchy, crawling along, just awful—that I had to fix everything to get it running right. And now? It’s actually working fine. I ended up Googling how to kill those automatic updates on Windows 7 (for some reason, nobody here ever mentions that, and I know I'm not the only one dealing with this mess). So, I shut them off. (If you're struggling with the same thing on Windows 7, here's the deal: Control Panel, Windows Update, change settings, set "Install updates automatically" to "Never," then hit OK.)

Go to control panel -> administrative tools -> services -> Windows update -> if it says running -> right click -> stop -> right click -> disable. Honestly, what you wrote isn't quite the full story.

That's it. No more Windows updates. Seriously, once you realize your system is finally running smoothly, why even bother updating? You aren't getting anything useful. All those geeks love to drone on about how Cortana is better or Edge is superior, but let's be real—those are just useless features shoved down your throat. Same goes for Office updates or whatever else. If it works? It works. If I have everything I need? I have it. Why mess with perfection?

I hope you’ve got enough sarcasm to go around...

It’s not even the worst part.

So, now we’re at that crossroads—do I actually go ahead and run the update, or just... not?

Honestly, the best way to handle this is to just grab a clean version of Windows with all the updates already baked in up to today's date—you can always find one online, and as long as you have your product key ready, you can activate it easily. It’s much better than trying to download every single live update one by one and wasting five hours of your life just sitting there waiting...

I went ahead and shut down the update—so, whatever happens, happens!

Not sure where else to post this, so I'm looking for some help. My backspace key isn't working, but only while I'm browsing the web. It works perfectly fine in Word. From what I can tell, the issue is localized to the browser itself—it seems like Chrome is blocking the key for some reason.

First question: Is there any way to fix this or unblock the key within the browser settings?
Second question: If there isn't a fix, which browsers would you recommend, provided it isn't Firefox?

Thanks

Opera.

Hey there...

I could really use some help getting Windows 7 back up and running. My system totally crapped out on me, and now the disc drive won't even read the install disc—even though I already messed with the BIOS settings to make sure it boots from the CD first. Every time I power the machine on, it just jumps straight into Windows Repair, tells me it can't find any errors, and then shuts itself down.

Any ideas on what to do?

Thanks in advance 🙂.

Maybe try a different CD. Or you could just try booting from a USB drive.

I'm not entirely sure if this belongs here, but I'll give it a shot since I can't find a specific thread for Google Chrome. A few days ago, I installed Google Chrome 120 (Windows 10, 64-bit). Keyword search worked perfectly fine at first, but after the very first day, it just stopped. For example, I set "yt" as a keyword for YouTube, so if I type "yt something" into the search bar, it should take me straight to the YouTube results for "something." That isn't happening anymore; instead, it just dumps me onto the YouTube homepage. It’s the exact same deal with every other site, except for google.com, which is my default. I guess I don't know what the issue could be. I've tried reinstalling Google Chrome multiple times, even going as far as wiping all my user data and everything, but still nothing. :/

Hey there,

I’m looking for some expert advice here. I’ve got a Microsoft EliteBook 8460 running Windows 7 Professional SP1, and up until today, everything was running perfectly fine. But now, out of nowhere, I’m getting stuck in this weird loop right at startup. Before the login screen even shows up, the monitor just flashes a "logging off" message, then pops back to the login screen. When I try to actually log in, the whole cycle just repeats—it says "logging off" again and kicks me right back to the start. I’ve been scouring the web for a fix, but my English isn't exactly great, so I feel like I'm just spinning my wheels and guessing. I did try hitting F8 to boot into Safe Mode, and strangely enough, everything works perfectly fine in there. Has anyone dealt with something like this before? If you know what might be causing this loop, I'd really appreciate the help..

Kenneth Allen11 said:Hey there,

I'm looking for some expert advice here. I have an HP EliteBook 8460 running Windows 7 Professional SP1. Everything was working perfectly until today, but now, right after I turn it on and before the login screen actually shows up, I get hit with a "logging off" message. Then the login screen pops up, but as soon as I try to log in, the whole loop starts over—it just keeps saying "logging off" and cycling back to the login screen. I've been scouring the web for a fix, but my English isn't great, so I'm basically just clicking around aimlessly. I did try hitting F8 to boot into Safe Mode, and everything works fine in there. Has anyone dealt with something like this before? Any ideas on how to fix it?

It’s possible the battery is acting up; try pulling it out and running the laptop strictly on AC power. Hold down the power button for at least 10 seconds until it shuts down completely. Then, try booting it up again. It could also be a driver issue or a problem with Windows itself. In that case, the smartest move would probably be to run a System Restore to a point when everything was still functioning correctly.

I don't know what to tell you, but if you're still trying to run things the old way, you're just asking for trouble. I remember back when I was working on a few older builds around Chicago, and we always ran into these exact same hurdles because people refused to update their protocols. It’s the same story every single time. You can try to patch over the cracks all you want, but eventually, the whole thing is going to give way if you aren't careful about how you're managing your settings. Honestly, it feels like we're having this same conversation every other week with people who think they can bypass the basic rules of the OS and not pay the price for it later. Just my two cents. kaže:
It’s entirely possible that the battery is acting up, so you might want to try pulling it out and just running the laptop straight off the power adapter for a bit. Try holding down the power button for at least ten seconds until the whole thing shuts down completely. Once it's dead, give it a shot turning it back on and see if that fixes anything. Honestly, though, it could just as easily be a driver issue or something glitchy within Windows itself. If that turns out to be the case, your best bet would probably be to run a system restore back to a point when everything was actually working like it should.

Hey, my laptop is constantly stuck on AC power. I tried running a system restore to fix things, but it looks like system Protection is turned OFF. 😕 It says "system Protection turned OFF," but I’m having a hell of a time actually finding where to toggle it back on based on the instructions I've been following.
First, go ahead and click to get the System menu open.

Next, just head over to the left pane and click on System protection. You’re going to need admin rights for this part, so don't be surprised if a prompt pops up asking for your administrator password or a quick confirmation. Just punch that in or hit okay to move forward.

3. Under Protection Settings, just select the drive you're working on and hit Configure.

4. Pick one from this list:

If you want to get your system settings back to how they were or roll back to an older version of your files, just go ahead and hit "Restore system settings and previous versions of files."

If you want to skip everything else and just go straight to restoring older versions of your files, go ahead and check the box that says "Only restore previous versions of files."

Just hit OK, and once that window clears, go ahead and click OK one more time to wrap things up.

The thing is, I just can't seem to find it, or maybe I'm just looking in all the wrong places.😕 If you're looking at point number two regarding "system Protection," and you're trying to figure out how to actually get that feature switched on or enabled, here is what you need to do.

Anyone got some advice for me...?

Kenneth Allen11 said:Hey, my laptop is constantly plugged in. I tried running a system restore, but it looks like system Protection is turned OFF. 😕 It says "system Protection turned OFF," and I’m having a hell of a time actually finding where to toggle it back on based on the instructions I've been following.
1. Go ahead and click to open System.

2. Head over to the left pane and select System protection. You’ll likely need admin rights to move forward here. If a prompt pops up asking for an administrator password or a quick confirmation, just go ahead and enter the credentials or hit confirm to proceed.

3. Under Protection Settings, select the drive and hit Configure.

4.Choose one of the following:

If you want to roll back your system configuration or recover older versions of your files, just head over and click "Restore system settings and previous versions of files."

If you want to limit the action specifically to restoring earlier file versions, just hit the "Only restore previous versions of files" option.

5. Hit OK, then just click OK one more time to wrap it up.

The issue is that I either don't have it, or I simply can't find it.😕 Regarding point 2, "system Protection"—if you’re looking to get that switched back on or enabled, here is how you handle it.

Any advice...?

Right-click on "This PC" and select Properties. Once that window pops up, look at the left-hand side; you should see an option for system Protection sitting right underneath Remote Settings.

I’m looking through my settings and I don't see any "system Protection" listed anywhere; all I can find is "Device Manager", "Remote setting", and "Advanced system setting".