Posts by boldhound8

Brenda Scott14 said:vodka mixed with green tea😍 tastes pretty damn good

Whatever😍

:Pijan:😁

Tried it a few times...

My advice? Just don't bother.😉

If you’re dead set on drinking vodka, just try (if you haven't already😁 ) mixing it with Sprite or some fruit juice.
Even a vodka spritzer isn't half bad.😁

Enjoy.🙂

Tommy said:I think you’re seriously lowballing Mosley and NASCAR...

Sad, but it's the truth...

Caught a little bit of it last time...

I don't usually watch this stuff, though.

But hey, it actually has some potential.👍

Goal or no goal...

It doesn't even matter anymore...

I just know this is gonna be the first LP final in the last decade that I’m straight up skipping.☕

The UEFA Champions League rules are absolute trash.😍

Typical...

I’ve got absolutely nothing intelligent to say about this.🙂

Jeffrey Ortiz7 said:I installed those Omega drivers on my Sapphire Radeon 9200 Atlantis. Everything was running great at first, but then out of nowhere, the card just died on me the next day...😲

I noticed these drivers have some kind of overclocking trick built-in, but I didn't touch a single thing. So I'm asking you—do these drivers overclock the card by default, or do you actually have to go in and tweak the settings yourself? It makes zero sense to me that my card crapped out just one day after installing them...

The GPU died because of the drivers?😲 I highly doubt it...

Yeah, the Omega drivers have an overclocking tool, but it’s turned off by default. It doesn't do anything until you manually enable it and decide to push the card yourself.

Maria Wilson71 said:I followed the instructions to a T, but I still have zero clue how to change this stupid little header. I'm still learning the ropes here...

I really hope this whole thing is just one big joke.😂

If it isn't, then we are seriously🙄

Omega totally rocks👍

casualpuma71 said:I don't think a fan vote even makes sense since there aren't enough people on this forum, plus it would just be way too biased anyway. 😉

tell me about it...

A fan choice😁

Choreography
Banner
Atmosphere
Flare show

👋

The flare show is actually decent here👍

William Kim13 said:yo guys, I need something beefier than the Zalman 7000B CU
I’m sure the answer is buried somewhere on this forum, but I honestly can't be bothered to dig through all those threads right now. Basically, does anyone know of a cooler that actually performs better than that one?
liquid cooling is on the table
combo air and liquid works too
anything else or a third option, basically just nothing costing more than $267.
I've got my AMD 2500+ (1833MHz) pushed to 3200+ (2200MHz) and it's totally fine
When I crank it up to 2500MHz it stays perfectly stable, but the temps are way too much.
thanks for the help

Of course there is...

Check out the Thermalright Si-97. It's passive, aluminum, socket A

Just slap a 120mm fan on it (like a Papst or Enermax, etc.), or even two if you want to get crazy😁

That's your $93 + a fan🙂

Andrew Mendoza66 said:Look, that’s what I’m asking you, mr. ex.👍

Yeah, just ask him.😉

By the way, that RAS active time you're looking at? It's actually just the tras... basically, it's just the last digit.

And for heaven's sake, set the ratio to 1:1. No question about it.

Oh, and one more thing—go ahead and install CPU-Z. It'll lay out everything you need to know about your RAM and CPU perfectly.

For anything else, just hit up Everest.

Andrew Mendoza66 said:I don't have any specific settings defined for my RAM in the BIOS—it's just set to Manual—but I actually want to know which value goes where.

For example: 2-2-2-5 (which represents CAS#, RAS#... etc.)

1T/2T Memory
CAS# Latency
RAS# To Case Delay
Min RAS# Active Time
Row Precharge Time

CAS# Latency is usually your first number... so, that's the 2.
RAS# To Case Delay is typically the second one... so, that's the 2.
RAS# Precharge is the third digit, making it 2.
Cycle Time (TRAS) is the last number... so, that's the x (usually it's just the sum of those first three numbers).

Andrew Mendoza66 said:Alright, cool. I flashed the new BIOS and now my idle temps are sitting at a solid 40 degrees.👍 👍 👍

So, now I'm wondering if there's any actual juice left to squeeze out of this Sempron 2800+ of mine. Anyone got any bright ideas on how to dial in the settings for my 512mb Kingmax PC-3200?😁

Lower is always better.😁

Look, try 2-2-2-x. Honestly, I doubt it'll work.😁

Or maybe something closer to 2.5-2-3-x. That might actually pull it off...

Rest in Peace Mr. Michels🙂

Jason Harris2 said:Look, I’ve got a potential candidate for hitting that 4GHz PR, but I need a way better cooler first. Honestly, I’m too paranoid about crashing my RAID array to even try it right now.😁

Last time I pushed it, I had it clocked at 2400MHz with 220+11 on 1.60v using some cheap off-brand RAM and a $17 cooler. It sat at 50 idle and hit 65 under full load.
BTW, anyone got a solid recommendation for a decent cooler for a GA-7NNXPV with DPS? There’s zero clearance and no mounting holes on this board. Absolute pain in the ass.😢

Check out my thread (soc A)🙂

My mobile chip runs perfectly fine at 2500, and its absolute ceiling is 2750.🙂

Gerald Turner48 said:It looks alright... but maybe your P4 just doesn't have enough juice at 4GHz to actually boot up. Try checking with a voltmeter or some software to see what your +12V rail is doing when you're sitting at 3.95GHz... if it drops below 11.8V or spikes above 12.35V, that’s probably why you can't hit the 4 mark.

I don't believe this...

My old mobile rig was running at 2600 MHz on a measly 11.60V...

But since that was a total disaster waiting to happen, I switched to an Enermax and now my +12V rail is holding steady at 11.95V.🙂

Mr. Nice Guy said:I’m rocking a "standard" 2600 right now. Is this actually worth picking up?

Not in a million years...

Just save up your cash and jump straight to a 754 or a 939 instead.

Joshua Kern10 said:Quick question here.
I see there’s a phone listed with a 2800+ rating running on a
2133 MHz frequency. Is this basically the same processor architecture as the 2500 model?
If so, is there any chance I could overclock this thing to get even higher speeds?

That chip is clocked at 2.1 GHz out of the box.

Somewhere in that ballpark... you might squeeze out a tiny bit more 🙂 but don't expect miracles.